In den Warenkorb gelegt

0,00€ 0 Produkte   Einsehen
Zur Kasse

Adafruit

Der Marktführer in Elektronik für Maker und Bastler, produziert und versendet seine Produkte aus dem Herzen New Yorks; und das seit 2005. Unter den vielen tausend Adafruit Produkten ist für den Anfänger bis zum Experten für jeden etwas dabei. Einmalig sind die vielen Produkt-Dokumentationen, Videos und exzellent gemachten Anleitungen.

Adafruit

Produkte Sortieren nach: Empfehlung Popularität Titel Neueste Preis
Neu

Circuit Playground Express - Developer Edition   ADA3333

Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. Adafruit have taken the original Circuit Playground Classic and made it even better!

28,50€
(inkl. 19% USt zzgl. Versand)

2 übrig
Neu

Adafruit PiUART - USB Console and Power Add-on for Raspberry Pi   ADA3589

Here's another super handy add-on for your Raspberry Pi computer, perfect for 'head-less' setups! The PiUART adds a MicroUSB to serial connection so you can use any serial port software to connect to the Pi's console.

8,00€
(inkl. 19% USt zzgl. Versand)

10 auf lager

Adafruit Pi Protector for Raspberry Pi Model B+ / Pi 2 / Pi 3   ADA2292

You've seen the A+ pocket protector - cometh the hour for the B+ / Pi 2 version. Introducing PaintYourDragon's last-cut masterpiece part ii: Adafruit Pi Protector for Raspberry Pi Model B+ / Pi 2 / Pi 3! It's not quite a full case, however it will keep your Pi B+ safe and svelte.

8,25€
(inkl. 19% USt zzgl. Versand)

18 auf lager

Medium Surface Transducer with Wires - 4 Ohm 3 Watt   ADA1785

Turn any surface/wall/table etc into a speaker with a surface transducer. This type of speaker does not have a moving cone like most speakers you've seen. Instead, a small metal rod is wrapped with the voice coil. When current is pulsed through the coil, the magnetic field causes a piece of metal to expand and contract - and if it's pressed against a surface it turns the transducer into a speaker!

16,45€
(inkl. 19% USt zzgl. Versand)

Ausverkauft

Adafruit Micro servo   ADA169

Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos.

6,95€
(inkl. 19% USt zzgl. Versand)

9 auf lager

DHT22 temperature-humidity sensor + extras   ADA385

The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

9,50€
(inkl. 19% USt zzgl. Versand)

Ausverkauft

Super Bright White 5mm LED (25 Stück)   ADA754

Need some really bright LEDs? We are big fans of these clear white LEDs, in fact we use them exclusively in our kits. They are very bright and have about 25 degree LED beam so they're good for illumination, head lamps, spotlights, etc. They go easily into a breadboard and will add that extra zing to your project.

7,00€
(inkl. 19% USt zzgl. Versand)

10 auf lager

GT2 Alu Zahnscheiben - 20-Tooth 6mm-Belt 8mm-Bore   ADA1252

For precise motion control, GT2 belts and pulleys offer excellent precision at a great price. This pulley is meant for use with GT2 6mm wide belts only - MXL belts will slip due to the different tooth profile.

8,00€
(inkl. 19% USt zzgl. Versand)

10 auf lager