In den Warenkorb gelegt

0,00€ 0 Produkte   Einsehen
Zur Kasse

Elektronik

Mittlerweile haben wir einen wahren Basar an Hobbyelektronik-Goodies in unserer Schatztruhe angesammelt. Wer suchet der findet!

Elektronik

Produkte Sortieren nach: Empfehlung Popularität Titel Neueste Preis
Neu

SparkFun weather:bit   DEV-14214

The SparkFun weather:bit is a fully loaded “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional weather station.

20,00€
(inkl. 19% USt zzgl. Versand)

5 auf lager

Pololu 5V Step-Up Spannungsregler U1V11F5   Pololu 2562

This compact (0.45″×0.6″) U1V11F5 switching step-up (or boost) voltage regulator efficiently generates 5 V from input voltages as low as 0.5 V.

4,95€
(inkl. 19% USt zzgl. Versand)

42 auf lager

SparkFun GPS Breakout   BOB-11818

This is a more universal GPS breakout board that uses a vertical SMD connector which is perfect for the GP-735T GPS receiver that we sell.

4,00€
(inkl. 19% USt zzgl. Versand)

35 auf lager

SparkFun Bluetooth Audio Breakout - BC127   WRL-11927

This is a breakout for the BC127 Bluetooth Module. The BC127 is a highly flexible, low power, small form factor Bluetooth Version 4.0 Certified Audio module. This is an ideal module for developers who want to quickly and cost effectively integrate Bluetooth functionality into their products.

47,55€
(inkl. 19% USt zzgl. Versand)

2 übrig

SparkFun TRRS 3.5mm Jack Breakout   BOB-11570

TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground.

3,95€
(inkl. 19% USt zzgl. Versand)

31 auf lager

SparkFun RFID Reader Breakout   SEN-13030

This is a simple breakout board for our RFID readers. The SparkFun RFID Reader Breakout converts the 2mm pins to bread board friendly 0.1" headers. With this ability the ID-3LA, ID-12LA, and the ID-20LA you can solder the reader directly to the breakout board or use the 2mm sockets.

2,10€
(inkl. 19% USt zzgl. Versand)

11 auf lager

SparkFun Electret Microphone Breakout   BOB-12758

This small breakout board couples an Electret microphone (100Hz–10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knocks or any sounds loud enough to be picked up by a microcontroller’s analog-to-digital converter. Each breakout comes fully assembled and works from 2.7V up to 5.5V.

6,45€
(inkl. 19% USt zzgl. Versand)

11 auf lager

XBee Pro 63mW Wire Antenna - Series 2B (ZigBee Mesh)   WRL-10421

This is the XBee XBP24-BZ7WIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

29,95€
(inkl. 19% USt zzgl. Versand)

Ausverkauft

SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2   SEN-11084

Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it’s easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius.

16,00€
(inkl. 19% USt zzgl. Versand)

2 übrig