Tutorials & Projekte

Raspberry Pi 3 B+

Raspberry Pi 3+  /RPI-026

36,00€ inkl. 19% MwSt zuzügl Versandkosten
Auf Lager
66,00€ inkl. 19% MwSt zuzügl Versandkosten
/ Weitere Informationen
9 auf Lager
100,00€ inkl. 19% MwSt zuzügl Versandkosten
/ Weitere Informationen
13 auf Lager

Der neueste Raspberry Pi 3 Model B+ hat einen schnelleren 64-bit 1.4GHz Quad Core Prozessor, 1GB RAM, schnelleres dual-band 802.11 b/g/n/ac Wireless LAN, Bluetooth 4.1, und deutlich schnelleres 300Mbit/s Ethernet.

Der Pi 3 B+ hat ein nahezu gleichen Design wie der Vorgänger, so dass die meisten Add-on Boards (HATs) weiterhin genutzt werden können. Allerdings haben kleinerer Designänderungen dazu geführt, dass wir das Pibow und Pibow Coupé Gehäuse überarbeitet und Pi 3 B+ optimiert haben.

Technische Daten Raspberry Pi 3 Model B+ 

  • 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU (BCM2837)
  • On-board wireless LAN - dual-band 802.11 b/g/n/ac (CYW43455)
  • On-board Bluetooth 4.1 HS low-energy (BLE) (CYW43455)
  • 4 x USB 2.0 ports
  • 300Mbit/s ethernet
  • 40 GPIO pins
  • Full size HDMI 1.3a port
  • Combined 3.5mm analog audio and composite video jack
  • Camera interface (CSI)
  • Display interface (DSI)
  • microSD slot
  • VideoCore IV multimedia/3D graphics core @ 400MHz/300MHz

Mit dem ARMv8 Prozessor kann die ganze Palette von ARM GNU/Linux Distributionen genutzt werden, inklusive Snappy Ubuntu Core, sowie Microsoft Windows 10 IoT edition.

Es wird das neueste NOOBS Image für die Wireless LAN und Bluetooth Treiber benötigt!  Eine SD Karte mit vorinstalliertem NOOBS finden Sie hier.oder in unseren Komplettpaketen Pi 3 B+ Essentials Kit und Pi 3 B+ Starter Kit.

Faster processing

Improved thermals on the Pi 3 B+ means that the CPU on the BCM2837 SoC can now run at 1.4GHz, a 17% increase on the previous Pi 3 model (which ran at 1.2GHz).

Video performance on Pi 3 B+ is similar to the previous generation Pi 3, the VideoCore being clocked at 400MHz for video processing and the 3D graphics processor running at 300MHz.

Faster wireless

A significant change on the Pi 3 B+ compared to the Pi 3 is the inclusion of a new faster, dual-band wireless chip (CYW43455) with 802.11 b/g/n/ac wireless LAN and Bluetooth 4.1.

The dual-band 2.4GHz and 5GHz wireless LAN enables faster networking with less interference (although the higher bandwidth has less range), and the new PCB antenna technology should allow better reception.

Bluetooth allows you to use a wireless keyboard/trackpad without extra dongles, keeping things nice and tidy.

Faster ethernet

The Pi 3 B+ has significantly faster wired networking, thanks to an upgraded USB/LAN chip, and you should see speeds that are 3-5x faster than on previous models of the Pi, at least 300Mbit/s.

GPIO and layout

The GPIO header remains the same, with 40 pins, as on the previous three models of Pi. However, it should be noted that the new PoE header pins may contact components on the underside of some HATs, like Rainbow HAT. Some standoffs will prevent any mischief from occurring though!

The metal shielding on the wireless circuitry and the SoC may also cause shorts against larger components on the underside of HATs, pHATs, and SHIMs. In the first two cases, standoffs will help again; in the latter, a couple of small pieces of insulating tape or Kapton tape will prevent any shorts.

Note that older Pibows will not fit the new Pi 3 B+! Because of changes to some components on the topside of the board, we've redesigned our Pibow and Pibow Coupé cases to ensure they fit snugly. The new Pibows are backwards compatible with the previous model Pi 3.



Noch keine Bewertung vorhanden Schreibe eine Bewertung